Generation Specific > 1st Generation Build thread
Joe's SA project
(1/1)
joe1573:
Well I got my self a 1980 rx7 last November from down south. She's not perfect but their is no rust. I have a lot of changes I would like to make and I will try to post as many as I can. Here are some pictures to start and more to come.
joe1573:
So, my car has an open diff., 3.909 gear and rear drums. The 83 GSL has LSD, 3.933 gear and 9" disc brakes. I got lucky on craigslist and found this.
joe1573:
This is now ready to put on, but it will have to wait til I got time.
I sandblasted everything, primed and painted, new oil seals, new bearings, new brake hard and stainless breaded lines, parking brake cables, I rebuilt the calipers, hawk pads, and slotted rotors.
The rear calipers cost over $100 each but I went with the rebuild kit $40 and does both sides. Racing beat wanted $245 plus shipping for rear rotors, I found a place that is much cheaper(less than half). You are not allowed to view links.
Register or Login I will let you know how they work as soon as I drive with them on.
~Groll69~:
Joe, that is looking great. i need to hit you up to sandblast my housings. :)
joe1573:
You are not allowed to view links.
Register or LoginJoe, that is looking great. i need to hit you up to sandblast my housings. :)
--- End quote ---
Home made sanding box. Not the best but got the job done.
Navigation
[0] Message Index
Go to full version