Author Topic: dandoes FC3S  (Read 7025 times)

0 Members and 1 Guest are viewing this topic.

Offline ~Groll69~

  • Administrator
  • Rotary God!!
  • *****
  • Posts: 1235
  • Karma: 1
  • Gender: Male
    • Elegant Lady Bridal and Tuxedo
Re: dandoes FC3S
« Reply #45 on: June 02, 2016, 07:36:24 AM »
looking good.  Can't wait to see it in person when your done with it.
"Long Live Rotary"

An RX-7 is like having a slut as a gf! She will love you, but she will also screw around with the guy at the parts store, most of the local cops, your insurance agent, your apex seals, your bank account and your credit card!!!

Offline ITSWILL

  • Rotary God!!
  • ******
  • Posts: I am a geek!!
  • Karma: 9
  • Gender: Male
Re: dandoes FC3S
« Reply #46 on: June 03, 2016, 07:48:37 AM »
Did you put a pinion snubber in? If not I would highly suggest it.
86 Base LS1 w/100 shot
88 TII 20B T70 turbo

Offline dandoe

  • Jr. Member
  • **
  • Posts: 45
  • Karma: 1
  • Gender: Male
Re: dandoes FC3S
« Reply #47 on: June 06, 2016, 06:25:26 PM »
did not, we shall see how bad wheel hop really is lol.

Offline dandoe

  • Jr. Member
  • **
  • Posts: 45
  • Karma: 1
  • Gender: Male
Re: dandoes FC3S
« Reply #48 on: June 06, 2016, 06:37:49 PM »
Finished up my fuel system plumbing. I have to mount the bulkhead fitting to the sender cover and install the fuel pump and that can get checked off the list. 

feed line plumbed up You are not allowed to view links. Register or Login

return line
You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login

had to do alittle massaging to fit that awkward 90* You are not allowed to view links. Register or Login

and all set. the return from the FPR is ran to the stock feed hardline back to the tank.
You are not allowed to view links. Register or Login

then subframe went back in and i threw everything on for a couple progress pics
You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login

engine came out again to finish up the bay and get started on the chassis harness. threw in a new master cylinder tonight and bent up a new passenger brake line too.

Offline ITSWILL

  • Rotary God!!
  • ******
  • Posts: I am a geek!!
  • Karma: 9
  • Gender: Male
Re: dandoes FC3S
« Reply #49 on: June 07, 2016, 05:47:17 AM »
Looking pretty good.  I have to mention that the fuel feed line scares me a little.  In the picture at least it looks like if you hit something  that engine could come back and snap that fuel fitting on the rail right off and start dumping fuel everywhere!
86 Base LS1 w/100 shot
88 TII 20B T70 turbo

Offline dandoe

  • Jr. Member
  • **
  • Posts: 45
  • Karma: 1
  • Gender: Male
Re: dandoes FC3S
« Reply #50 on: June 07, 2016, 06:53:08 PM »
You are not allowed to view links. Register or Login
Looking pretty good.  I have to mention that the fuel feed line scares me a little.  In the picture at least it looks like if you hit something  that engine could come back and snap that fuel fitting on the rail right off and start dumping fuel everywhere!

i agree, it is close but that was as much massaging as i could do with the engine in the car. should be good now!

Offline ITSWILL

  • Rotary God!!
  • ******
  • Posts: I am a geek!!
  • Karma: 9
  • Gender: Male
Re: dandoes FC3S
« Reply #51 on: June 08, 2016, 05:54:08 AM »
I have seen metal brackets that go behind fuel rails in this condition. Maybe something to consider?
86 Base LS1 w/100 shot
88 TII 20B T70 turbo

Offline dandoe

  • Jr. Member
  • **
  • Posts: 45
  • Karma: 1
  • Gender: Male
Re: dandoes FC3S
« Reply #52 on: June 09, 2016, 06:14:02 PM »
You are not allowed to view links. Register or Login
I have seen metal brackets that go behind fuel rails in this condition. Maybe something to consider?

definitely, do you have a link?   

Offline ITSWILL

  • Rotary God!!
  • ******
  • Posts: I am a geek!!
  • Karma: 9
  • Gender: Male
Re: dandoes FC3S
« Reply #53 on: June 10, 2016, 04:36:54 AM »
It would have to be something custom. I was looking as some ls3 crate engines that had it yesterday. I'll snap a pic at work to give you an idea what I am talking about.
86 Base LS1 w/100 shot
88 TII 20B T70 turbo

Offline dandoe

  • Jr. Member
  • **
  • Posts: 45
  • Karma: 1
  • Gender: Male
Re: dandoes FC3S
« Reply #54 on: August 22, 2016, 06:15:09 PM »
Will texted me today asking about the car so i figured i should update this thread. I have been working on the car almost every weekend and stockpiling parts which is half the fun. The car is getting pretty close, and it needs some fab work and some more hard work on my part before it is running. copying and pasting most of this from another thread!!!


Getting good at pulling this engine by myself now. new front main seal in
You are not allowed to view links. Register or Login

new timing belt and idler

You are not allowed to view links. Register or Login

got rid of the stock oil cooler. -10 lines will be ran to the stock oil cooler.

You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login

cleaned up the surface rust from the old leaking master cylinder

You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login

now i realize why everyone goes crazy with the reflective gold tape. all cleaned up and primed. new passenger brake line is in and much cleaner also

You are not allowed to view links. Register or Login

finalized radiator position with the fans. need to fabricate a cross bar to support the bottom of the radiator and the FMIC.

You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login

Offline dandoe

  • Jr. Member
  • **
  • Posts: 45
  • Karma: 1
  • Gender: Male
Re: dandoes FC3S
« Reply #55 on: August 22, 2016, 06:15:55 PM »
intercooler mocked up in position. this is a CX racing unit. there will be ducting above and below the IC to feed fresh air to the radiator.

You are not allowed to view links. Register or Login

painted and shaved the bracket on the spark plug cover

You are not allowed to view links. Register or Login

ready to go in for final mockup, plumbing, and final wiring

You are not allowed to view links. Register or Login

ready to go

You are not allowed to view links. Register or Login

engine in and intake setup mocked up.

You are not allowed to view links. Register or Login

another one of the IC mocked up

You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login

Offline dandoe

  • Jr. Member
  • **
  • Posts: 45
  • Karma: 1
  • Gender: Male
Re: dandoes FC3S
« Reply #56 on: August 22, 2016, 06:16:36 PM »
CD999 shifter relocation finally came in. thanks to TF works for the hook up. top quality on this thing!!!

You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login

Borrowed my friends harbor freight flux welder and tacked up my radiator/intercooler support.

You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login

Used these radiator isolators that i got on amazon
You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login

IC bracket
You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login

Ducting is next
You are not allowed to view links. Register or Login

this stock VVTI rad hose fits perfectly around the oil cooler.

Then did some trimming to fit the shifter
You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login

Rolled her out and washed all the dust off

You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login

Offline dandoe

  • Jr. Member
  • **
  • Posts: 45
  • Karma: 1
  • Gender: Male
Re: dandoes FC3S
« Reply #57 on: August 22, 2016, 06:17:24 PM »
excessive manufacturing A/C delete bracket.. love the quality on all their products!
You are not allowed to view links. Register or Login

Was going to make my own turbo oil lines but ended up jumping on a boostlab sale and getting their 2JZ kit. Also nice quality here,
You are not allowed to view links. Register or Login

Bracket mounted
You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login

Oil lines mocked up
You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login

Will tidy the feed line up with a bracket
You are not allowed to view links. Register or Login

Picked up a PBM swirl pot to keep this 2JZ as cool as possible
You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login

And mounted
You are not allowed to view links. Register or Login

If you purchase the serial nine shifter relocation you will need this OEM nissan top plate for the lockout tab
You are not allowed to view links. Register or Login

once installed, i set the lockout and it now shifts smoothly and crisp through each gear. Awesome piece

Also scored this brand new Tial Q off the 2jz parts for sale FB page. Quick mockup with some scrap IC piping.
You are not allowed to view links. Register or Login

Then spent alot of cash on fittings and hose for my oil cooler and catch can setup.
You are not allowed to view links. Register or Login

I am using the stock oil cooler and the original mounting was scary close to the ground at this height. I ended up doing some massaging of the stock brackets and then flipped it on the backside which tucked it up nicely. Just ordered a 120* fitting for the top port

You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login

running this nice closed loop vibrant performance catch can
You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login

The existing PCV and breather ports on both valve covers have been removed and i will tap them 1/2NPT to run these canton fittings from each cover to the catch can
You are not allowed to view links. Register or Login

Waiting on hose to come in and then will start plumbing it all up. still need to mount the catchcan and get started on the interior wiring and power distribution, Also need to order a milspec connector to join the engine harness to the chassis. More to come!

Offline murz

  • Hero Member
  • *****
  • Posts: 622
  • Karma: 7
  • Gender: Male
Re: dandoes FC3S
« Reply #58 on: August 22, 2016, 07:50:39 PM »
Woah! One hell of an update! Figured you have been busy!! Let me know how you like that intercooler. Hope its finished soon before its cold again.
1986 AS GXL Turbo swapped
1993 VR R1

Offline ~Groll69~

  • Administrator
  • Rotary God!!
  • *****
  • Posts: 1235
  • Karma: 1
  • Gender: Male
    • Elegant Lady Bridal and Tuxedo
Re: dandoes FC3S
« Reply #59 on: August 23, 2016, 06:00:47 AM »
Looking great, keep us up to date on your progress.
"Long Live Rotary"

An RX-7 is like having a slut as a gf! She will love you, but she will also screw around with the guy at the parts store, most of the local cops, your insurance agent, your apex seals, your bank account and your credit card!!!