Michigan Rotary Club
Technical and Performance => General Rotary Technical Support => : Twisted August 18, 2020, 07:11:03 PM
-
OK so i cant get the inner bearing sleeve of the eccentric shaft. been messing with it when i have free time tried using a cheap rental puller quickly learn that was a bad idea when half of the bearing came out i have tried every thing i can think of even took a dremel to it cant get that thing out. car has been laid up almost a year now really just want to get it back together.
-
where are you located? Might be able to help you
-
i have used various things to get that pilot bearing out. the latest and most successful was pilot bearing tool with slide hammer from harbor freight. I had to put the right fingers into the eccentric shaft and then assemble the rest of the tool. once it was nice and tight then i used the slide hammer to beat it out.
The dremal has work for me in the past where i carefully cut a line in the pilot bearing all the way through and bent the metal in on itself to get it out.
-
I’m up in Ubly yeah I’m out of ideas
-
If you were a little closer i would pop over and help you. Unless you are able to bring it down to my house in ortonville. We could get it knocked out real quick.
-
Getting it there wouldn’t be a problem I have aaa. I’ll pm you my phone number if you wanna text me can try to figure something out