Michigan Rotary Club
New Members Help and Forum => Lounge => : fidelity101 February 03, 2012, 12:22:39 PM
-
I'm dropping the motor back in my FC and getting out by 1 person is easy but getting it back in is far more difficult. I need someone to man the hoist so I can get it bolted in and such.
not much stock to it, so there is a plethora of room as you know
I live in royal oak right next to 12 mile and rochester.
beers will be had,
630 803 4578
-
Just read this, hope it went well.
-
Shoot, i am in the area alot too. I wish i saw this post sooner. do you still need a hand with anything?
-
got it in, had a friend of mine come by and help me operate the lift. 95% complete now, just gotta fill with coolant, re-install exhaust from header back and about a half hour of electrical connector installs.
I'm thinking of going to a single exhaust because i cant install it by myself, anyone interested in an NA racing beat cat-back? I'm just gonna make a new single exhaust soon I think.
right now I'm rockin a stock 88.5 radiator (cap is on the radiator not the neck for some reason, but it was from an s4 car) until my friends at Griffin hooked me up with a sweet deal on this!
(http://www.polyperformance.com/shop/images/D/CU-58202-01-400.jpg)
Crossflow 24"w x 19"h overall
2 rows of 1.25"
16" Spal fan included, I think it moves something like 3000CFM
Just gotta weld brackets for stock mounting location and then reduce the bottom right outlet from 1.75" to 1.5" w/ a port for heater core. Probably not going to weld anything for that just use some pipe and a hose.
-
that is a nice radiator with fan