Michigan Rotary Club
Technical and Performance => Racing => Drifting => : awfc3s January 20, 2011, 06:30:12 PM
-
So I am really excited for this years drifting season to start. I've got a few upgrades that will be happening.
I already have a set of Tein type RA coilovers 10Kg/10Kg, rears are 16 way adjustable
*Just waiting to get one of my struts back from Tein after being rebuilt.
Also gonna be putting in my DTSS eliminators (can't wait)
Also doing a rollcage with door bars (necessary for tandem drifting)
Once I get my suspension on there I need to reconfigure how I want my alignment. I know that I want to run 1/8th toe in on the rear to help it slide a little better. possibly run anywhere from 0.5-1.5 degrees of negative camber in the rear as well.
Possibly a lil toe out in the front as well as more negative camber than rear (not positive yet) Don't think I'm gonna mess with caster cause I like how it is.
So That's kinda it for now until I decide I want something different.
-
So I am really excited for this years drifting season to start. I've got a few upgrades that will be happening.
I already have a set of Tein type RA coilovers 10Kg/10Kg, rears are 16 way adjustable
*Just waiting to get one of my struts back from Tein after being rebuilt.
Also gonna be putting in my DTSS eliminators (can't wait)
Also doing a rollcage with door bars (necessary for tandem drifting)
Once I get my suspension on there I need to reconfigure how I want my alignment. I know that I want to run 1/8th toe in on the rear to help it slide a little better. possibly run anywhere from 0.5-1.5 degrees of negative camber in the rear as well.
Possibly a lil toe out in the front as well as more negative camber than rear (not positive yet) Don't think I'm gonna mess with caster cause I like how it is.
So That's kinda it for now until I decide I want something different.
big bucks for a custom roll cage! the cage in my road racer cost $1300. they make bolt i ones for around $300 but the quality isnt as good
-
But it's a must have for competition drifting.
-
But it's a must have for competition drifting.
yeah deffinately, if your good at welding you could fab your own cage for just the cost of the supplys.
-
I was thinking about getting one of these kits from jegs
http://www.jegs.com/i/Jegster/550/945103K/10002/-1
and then adding a lil bit more to it. seems pretty cheap and its a weld in. plus I don't have to mess with bending the thing lol.
-
I was thinking about getting one of these kits from jegs
[url]http://www.jegs.com/i/Jegster/550/945103K/10002/-1[/url]
and then adding a lil bit more to it. seems pretty cheap and its a weld in. plus I don't have to mess with bending the thing lol.
lol yeah thats like a bottom line cage, mine follows the contour of the whole interior and has several cross members and diagonal tubes. with that cage if you roll the car you save yourself, but the roof will most likely cave in where it isnt supported by the cage. this one right here is about double the price, but is a lot more structually soundhttp://cgi.ebay.com/ebaymotors/Lemons-and-Chumps-Roll-Cage-86-92-MAZDA-RX-7-_W0QQcmdZViewItemQQhashZitem3cada05ab4QQitemZ260611005108QQptZRaceQ5fCarQ5fParts (http://cgi.ebay.com/ebaymotors/Lemons-and-Chumps-Roll-Cage-86-92-MAZDA-RX-7-_W0QQcmdZViewItemQQhashZitem3cada05ab4QQitemZ260611005108QQptZRaceQ5fCarQ5fParts)
-
Ya I would love to do something like that but cash is tight right now, plus I could always add to the cage in the future. Who knows we'll see what I have left over from taxes lol.
-
Ya I would love to do something like that but cash is tight right now, plus I could always add to the cage in the future. Who knows we'll see what I have left over from taxes lol.
yeah i hear ya, theres always a lot of wants but never enough money, i just hate cutting corners when it comes to safety
-
I definitely hear you on that one. Will see what gets done before the season starts and how much cash I have to spare. Id rather have something than nothing though.
-
I definitely hear you on that one. Will see what gets done before the season starts and how much cash I have to spare. Id rather have something than nothing though.
when does your season start? this one here is a lil cheaper, and still offers more support than the jegs one
http://cgi.ebay.com/ebaymotors/Roll-Bars-and-Cages-10-Point-86-92-MAZDA-RX7-_W0QQcmdZViewItemQQhashZitem3c9e8db7e1QQitemZ260358125537QQptZRaceQ5fCarQ5fParts (http://cgi.ebay.com/ebaymotors/Roll-Bars-and-Cages-10-Point-86-92-MAZDA-RX7-_W0QQcmdZViewItemQQhashZitem3c9e8db7e1QQitemZ260358125537QQptZRaceQ5fCarQ5fParts)
if it comes down to it then just having the minimum will at lest get you through the season, then u can add on later when cash is more available
-
jegs has that same one but for about $55 cheaper with shipping included.
http://www.jegs.com/i/Jegster/550/945104K/10002/-1
-
jegs has that same one but for about $55 cheaper with shipping included.
[url]http://www.jegs.com/i/Jegster/550/945104K/10002/-1[/url]
ohh even better, and shippings less too. im pretty sure thats the same cage that is in this retired race car that were about to scrap
-
Ya that seems like a good choice for the money. Just need to get a hold of a welder lol.
-
Ya that seems like a good choice for the money. Just need to get a hold of a welder lol.
yeah it its actually pretty supportive, the retired car was at one point rolled and all that needed to be done to repair the car was cut out the roof and weld in a new one. there are actually a few welders where i work, one of them actually was part of Scott Pruit's chmpionship team in the rolex series this year, he was one of their builders
-
Just got these in the mail today...
Racing Beat adjustable rear sway bar end links...
(http://i285.photobucket.com/albums/ll67/adubspyder/100_3141.jpg)
-
Tein coilovers to be re-installed this week as well as DTSS elims. Can't wait!!! Cage is next...